Manufacturing Guide

Fit Sample vs PP Sample vs Salesman Sample: What's the Difference?

July 19, 2026Minh Pham
Three hoodies in cream, light gray, and black are laid side by side, with a tag on the black one.

Garment manufacturers use at least four distinct sample types during product development — and each one serves a completely different purpose. Confusing a fit sample with a PP sample is not just a terminology error; it leads to approving the wrong things at the wrong stage, which causes production disasters. This guide defines every sample type used in apparel manufacturing, explains what it verifies, and describes the workflow from first concept to bulk production clearance.

---

## The Full Sample Sequence in Garment Manufacturing

From concept to production, a typical garment goes through this sequence:

| Stage | Sample Name | Purpose | Who Evaluates | |---|---|---|---| | 1 | **Proto Sample** | Initial design exploration | Designer, creative director | | 2 | **Fit Sample** | Fit, measurements, block refinement | Designer, fit model, merchandiser | | 3 | **Salesman Sample (SMS)** | Sales tool, order collection | Sales team, retail buyers | | 4 | **PP Sample** | Bulk production verification | Production team, QC | | 5 | **Top of Production (TOP)** | Random bulk check | QC agent |

Not every product goes through every stage. A simple basics reorder may skip directly from PP sample to production. A complex technical garment may require multiple rounds at each stage.

---

## Proto Sample (First Sample)

### What It Is The proto sample is the first physical version of a new garment. It is produced by the factory's sample room based on the buyer's sketch, mood board, reference garment, or tech pack. The proto sample is not expected to be perfect — it is an exploration.

### What It Verifies - Does the overall silhouette match the design intent? - Is the general construction approach correct? - Are the key details (pockets, collar, cuffs, closures) in the right place? - Is the fabric a reasonable approximation of the target material?

### What It Does NOT Need to Verify - Precise measurements — these are refined in fit sample - Exact bulk fabric — often made from closest available substitute - Final trims — often uses substitute hardware

### Lead Time - Garmentix: **7 working days** from confirmed tech pack - Industry average: 14–21 days

### Cost - Typically charged to buyer: $25–$80/sample + international shipping - For qualifying order discussions, many factories absorb proto sample cost

### How Many Rounds? - 1 round: Possible with a very clear brief and experienced factory - 2–3 rounds: Typical for new styles or complex garments - 3+ rounds: Usually indicates an unclear brief or significant design changes during development

✦ FACT: The #1 cause of multiple proto rounds is design decisions made after production starts. Every change to silhouette, construction, or fabric after Round 1 approval adds a full round. Lock your design before ordering a proto.

---

## Fit Sample

### What It Is The fit sample is a refined version of the proto — typically made after the buyer has approved the general direction in the proto, but needs to refine measurements and fit before the design is locked. The fit sample is evaluated on a fit model (or dress form) in the brand's target sizing.

### What It Verifies - All Points of Measure (POMs) against the tech pack size spec - Garment fit on the intended body: chest ease, shoulder drop, length, sleeve position - Silhouette on body — how the garment hangs and moves - Any comfort or wearability issues (armhole too tight, crotch too high, etc.)

### What It Does NOT Need to Verify - Exact bulk fabric (still may use substitute at this stage) - Final trims (placeholder acceptable) - Labeling

### Fit Session Process A proper fit session involves: 1. Fit model in the sample size wears the garment 2. Designer/merchandiser measures all POMs and compares to tech pack 3. Notes differences and judges subjective fit (not just measurements — how it looks and moves) 4. Written fit comments issued: each comment numbered, specific, referencing the POM or construction detail

### How Many Rounds? - 0 rounds: Sometimes proto sample is approved as fit sample (common for simpler products) - 1 round: Standard for new style with experienced factory - 2+ rounds: Complex silhouette, new block, or significant fit issues in Round 1

✦ FACT: Brands that don't have graded measurement specs before ordering a fit sample are wasting money. Without a grade spec, the factory has nothing to correct TO. The fit session should be an audit of a specified target, not a discovery process.

---

## Salesman Sample (SMS)

### What It Is The salesman sample (SMS) or showroom sample is produced for commercial purposes — to show buyers, retail partners, press, or investors before bulk production. The SMS is often (but not always) made after fit approval and before PP sample, placing it between fit confirmation and production lock.

### What It Verifies NOT a QC tool. The SMS is a commercial tool. It should look good, represent the final product accurately, but is not the production-verification standard.

### Characteristics - Typically made in only 1–2 colors and 1 size (the hero presentation combination) - Often higher quality finish than bulk production (sample room polish vs. production line) - May use substitute fabrics if bulk materials aren't yet sourced - May be made in quantities: 5–20 units for sales showroom or trade show

### When It's Ordered - Pre-season: brands show SMS at trade shows (MAGIC, Texworld) to collect wholesale orders before committing to production quantities - Direct-to-consumer brands building hype: SMS appears in lookbooks and social content before production ships

### SMS vs. Pre-Production Sample SMS ≠ PP sample. The SMS is for commercial presentation. The PP sample is for production verification. They serve completely different purposes and should not be confused: - You cannot approve an SMS as a substitute for PP approval - SMS may look better than bulk production (because it's hand-finished) - PP sample reflects what production will actually deliver

✦ FACT: A major reason for customer disappointment in pre-order campaigns is when brands use professionally photographed SMS images and the bulk production doesn't match. The SMS looked great; the PP sample would have shown the real production standard.

---

## PP Sample (Pre-Production Sample)

### What It Is The PP sample is the final approval gate before bulk production begins. It must be made from the exact same materials and processes that will be used in bulk production. PP approval is the buyer's written confirmation that the factory is cleared to cut and produce.

### What It Verifies 1. **Bulk fabric confirmed:** Same lot, same color, same feel as approved standard 2. **All trims confirmed:** Bulk zippers, buttons, labels — not prototypes or substitutes 3. **Construction confirmed:** Seam types, stitch density, pocket construction, as per spec 4. **Measurements confirmed:** All POMs within tolerance 5. **Color accuracy:** Under D65 lighting, matches approved lab dip 6. **Labels and packaging:** Correct main label, care label, size label

### Who Produces It The PP sample should be produced by the actual production operators, not the elite sample room. The PP sample is a performance demonstration of what the production floor can deliver at scale.

### Lead Time - Garmentix: **5–7 working days** from PP sample order confirmation - PP sample order can only be confirmed when all bulk materials are on-site at the factory

### The Critical Rule **PP sample must be made from confirmed bulk materials — no substitutions.** A PP sample made from substitute fabric is not a PP sample; it is a fit sample at best. If the factory produces a PP sample before bulk fabric arrives and uses substitute material, request a new PP sample after bulk materials arrive.

### How Many Rounds? - 1 round: Target. A well-developed product with clean proto/fit history should need only 1 PP round. - 2 rounds: Acceptable if first PP failed due to minor material issue - 3+ rounds: Serious problem signal — investigate root cause

---

## TOP (Top of Production) Sample

### What It Is The TOP sample is a random pull from the beginning of bulk production — typically after the first 50–200 units are completed. It is not standard for all orders, but common for higher-value or compliance-sensitive shipments.

### What It Verifies - Does actual bulk production match the approved PP sample? - Is quality consistent across the production run (not just in the carefully-made PP sample)?

### When to Request a TOP - First order with a new factory (always) - Orders above $15,000 FOB value - Products with complex construction where production shortcuts are possible - Brands with previous quality issues from a factory

---

## Sample Approval Best Practices

### 1. Issue Written Approvals — Always

Every sample approval must be documented in writing: - Email with subject: "APPROVED: [Brand] [Style] [Revision] PP Sample — [Date]" - Or signed approval form - Verbal approvals are not binding and create disputes

### 2. Reject Clearly and Specifically

Never reject a sample vaguely. Structure every rejection comment as: - **Location:** Where on the garment is the issue? - **Current state:** What is wrong? - **Required correction:** What must change? - **Reference:** What spec/measurement/approval standard are you comparing to?

**Example rejection comment:** "Comment 3: Hood height. Current 28cm. Tech pack spec 30cm. Please increase hood height by 2cm. Reference: tech pack spec sheet, POM Table, line 14."

### 3. Mark Up Photos

Photo markups are the fastest way to communicate construction corrections: - Circle or arrow to the exact issue - Add text annotation - Attach to email alongside written comments

### 4. Track Revisions with Version Numbers

Every round of samples must have a revision number: - Proto 1.0 → Proto 1.1 → Proto 2.0 - PP Sample Rev 1 → PP Sample Rev 2

Without version tracking, buyers and factories lose track of which standard is current, causing expensive re-do rounds.

---

## Sample Development Timeline: Total Calendar Budget

For a new style at Garmentix:

| Stage | Garmentix Lead Time | Buyer Review Time | Total | |---|---|---|---| | Proto Sample | 7 working days | 5–7 days | ~14 days | | Fit Sample (if needed) | 5–7 working days | 5–7 days | ~12 days | | PP Sample | 5–7 working days | 5–7 days | ~12 days | | **Total (1 round each)** | | | **~38 days** |

Add 10–14 days per additional round at any stage. Budget 45–60 days for sampling on first-time styles, and 30–40 days for reorders with minor changes.

---

## Garmentix Sample Services

| Service | Detail | |---|---| | Proto sample lead time | 7 working days from confirmed tech pack | | PP sample lead time | 5–7 working days from confirmed bulk materials | | Sample room capability | In-house; no outsourcing | | Tech pack support | Available at $150–$350/style | | Sample shipping | DHL/FedEx, buyer's account | | Approval documentation | Digital sign-off via email or garmentix.net portal |

For new project inquiries: info@ttgco.net | garmentix.net

---

*Garmentix | Ho Chi Minh City, Vietnam | info@ttgco.net | garmentix.net* *OEM/ODM apparel manufacturing | MOQ from 200 pcs | Sample in 7 working days | FOB HCMC*

Minh Pham

Technical Pattern Master, TT Garment Trade

12 years in garment pattern-making and product development. Expert in tech pack creation, grading, and production-ready specifications for OEM/ODM manufacturing.