Education

How Detailed Does a Tech Pack Need to Be? Factory Minimums Explained

June 14, 2026Minh Pham
A garment tech pack with shirt sketches, measurement charts, construction details, fabric swatches, buttons, and a ruler on a desk.

More detail is not always better. Here is the minimum documentation your factory needs versus what adds unnecessary complexity to your tech pack.

One of the most common questions from fashion startups is how detailed a tech pack needs to be. The answer depends on the garment type, your factory relationship, and the sampling round. Over-documenting wastes your time and can confuse factories with irrelevant information. Under-documenting leads to sampling errors and revision rounds. The goal is the right level of detail — not maximum detail.

THE FACTORY MINIMUM FOR A FIRST SAMPLE

For a first proto sample, a factory needs enough information to produce a garment that demonstrates your design intent with reasonable accuracy. The minimum documentation required for a proto sample is:

• Fabric specification: fiber content, weight, and construction • Color specification: Pantone reference or swatch • Measurement table: key measurements for the base size (chest, length, shoulder, sleeve if applicable) • Technical flat sketch: front and back showing all panels, seams, and major design details • Basic BOM: main fabric, key trims, label requirements • Construction notes: any non-standard seam or construction requirements

With this documentation, an experienced factory can produce a proto sample close enough to evaluate fit, proportion, and basic construction. You do not need a fully detailed tech pack for a proto.

WHAT TO ADD FOR FIT SAMPLE AND PRE-PRODUCTION SAMPLE

After proto evaluation, your tech pack should expand to include:

• Complete graded measurement table for all sizes • Detailed construction specifications with stitch types and seam allowances • Full BOM with every trim specified by size, finish, and quantity • Placement diagrams for all labels, prints, and embroidery • Packaging and folding instructions

WHEN MORE DETAIL HELPS

More detail helps when:

• You are working with a new factory that has not produced your garment type before • The garment has complex construction elements (bonded seams, laser cutting, multiple panels) • Your quality standards are stricter than the factory's defaults • You have experienced specific sampling errors in previous rounds and need to prevent recurrence

MORE DETAIL THAT DOES NOT HELP

Adding unnecessary detail to a tech pack creates confusion:

• Specifying construction methods the factory uses as standard anyway adds page count without adding clarity • Including internal brand documents, trend reports, or marketing material in the tech pack confuses factories about what is specification and what is context • Over-specifying simple elements with multiple redundant callouts reduces the signal-to-noise ratio

THE REVISION PRINCIPLE

Your first tech pack should be at the proto minimum level. After each sampling round, add detail to address the specific deviations you observed. This iterative approach builds exactly the right level of documentation for your product and factory combination over time.

GARMENTIX APPROACH

Garmentix provides detailed feedback on tech packs after each sampling round, identifying which elements need more specification and which are adequately covered. Contact garmentix.net/contact to discuss your documentation requirements.

SUMMARY

A first proto sample requires fabric spec, color, base measurements, technical flat, basic BOM, and key construction notes. Full production documentation — graded measurements, complete BOM, all placement diagrams — is added after proto evaluation. Add detail iteratively based on sampling feedback, not preemptively.

FREQUENTLY ASKED QUESTIONS

Q: How detailed does a tech pack need to be for a factory to start sampling? A: A tech pack must be detailed enough that a factory can produce a sample without asking any questions. The minimum by garment category: for basic knitwear (tees, hoodies) — complete flat sketches, graded measurements with tolerances, fabric GSM and composition, seam types, and label placement. For activewear — all knitwear requirements plus stitch type (flatlock vs. overlock), elastic specifications, and performance fabric codes. For woven garments — all of the above plus interlining specifications and hardware details.

Q: What level of construction detail do factories need in a tech pack? A: Factories need: seam type (overlock, flatlock, lockstitch), stitch per inch, seam allowance width, hem finish and width, and specific construction methods for details (how pockets are attached, how collars are finished). Factories that produce regularly from well-written tech packs can fill minor construction gaps from experience — but they should not have to. Unspecified details create inconsistency between revision rounds.

Q: Do I need to specify fabric composition percentage in my tech pack? A: Yes, exactly. State the composition percentage as it will appear on the care label — for example, "95% cotton 5% elastane" or "100% organic cotton (GOTS certified)." Vague descriptions like "cotton blend" or "stretchy fabric" are not actionable. Fabric composition affects factory fabric sourcing, care label requirements, and certification eligibility.

Q: Can a factory tell me if my tech pack is detailed enough before sampling begins? A: Yes, and you should ask them to. A factory tech pack review — where the factory's sample department evaluates your documentation before committing to sampling — identifies gaps before they cause revision rounds. Reputable factories offer this as standard or on request. Garmentix performs tech pack review for all brands before factory submission. Contact us at garmentix.net/contact.

RELATED READING

What to Include in a Tech Pack — Complete Checklist: garmentix.net/blog/what-to-include-in-a-tech-pack-complete-checklist-for-fashion-brands 7 Tech Pack Mistakes Fashion Startups Make: garmentix.net/blog/7-tech-pack-mistakes-fashion-startups-make-and-how-to-fix-them Tech Pack for Clothing Manufacturers — What Factories Need: garmentix.net/blog/tech-pack-for-clothing-manufacturers-what-factories-actually-need The Tech Pack Revision Process — How Many Rounds Is Normal: garmentix.net/blog/the-tech-pack-revision-process-how-many-rounds-is-normal

#tech pack detail#garment manufacturing#factory documentation#clothing specification

Minh Pham

Technical Pattern Master, TT Garment Trade

12 years in garment pattern-making and product development. Expert in tech pack creation, grading, and production-ready specifications for OEM/ODM manufacturing.