Manufacturing

The Tech Pack Revision Process: How Many Rounds Is Normal?

June 14, 2026Steven Tran
Annotated garment sketches, fabric swatches, revision notes, and approval stamps lie across a wooden desk beside a red pen.

Two to three revision rounds is standard for a new style. More than four suggests a documentation problem. Here is how to manage the tech pack revision process efficiently.

The tech pack revision process is a normal part of clothing development. Understanding how many revision rounds to expect — and when a high number of rounds signals a fixable problem — helps you set realistic timelines and budgets for your sampling program.

STANDARD REVISION ROUNDS BY GARMENT TYPE

Industry standard revision rounds for a new style:

• Basic knitwear (t-shirt, sweatshirt, simple hoodie): 2 revision rounds • Moderate complexity (structured hoodie, joggers, polo): 2-3 revision rounds • Complex garments (outerwear, technical activewear, tailored pieces): 3-4 revision rounds • Very complex styles (tailored outerwear, bonded construction, multi-panel technical): 4-5 rounds

These numbers assume a complete and accurate tech pack was submitted at the start. If tech pack documentation was incomplete or ambiguous, you can add one to two rounds to each category.

THE STANDARD SAMPLING PROCESS

Proto sample: The first sample based on the initial tech pack. Purpose is to evaluate overall silhouette, proportion, and basic construction intent. Expect significant variation from spec at this stage.

Fit sample: After proto approval or with fit corrections applied. Focus shifts to measurements — evaluating fit across the body with the target customer's proportions in mind. Construction improvements from proto are incorporated.

Pre-production sample (PP sample): After fit approval. This sample uses final production fabrics and trims. Purpose is to confirm all elements are correct before bulk production begins. This sample should be very close to your production intent.

Bulk production approval: Some brands require one garment from bulk to be approved before the factory produces the full order.

WHEN TO BE CONCERNED ABOUT REVISION COUNT

Four or more rounds on a simple garment signals one of these problems:

Unclear tech pack: The factory is interpreting ambiguous documentation differently each time. Solution — review documentation after round two and add explicit callouts for every element that has deviated.

Communication breakdown: Comments are being misunderstood or not fully implemented. Solution — be extremely specific in revision comments. Photograph each deviation with a measurement and specify the exact correction required.

Factory skill mismatch: The factory may not have the equipment or experience for the construction you are specifying. Solution — discuss the construction constraints with the factory before continuing and consider adjusting the design.

Design changes mid-sampling: Adding new design elements between rounds resets parts of the sample. If you change the garment design during sampling, revision count increases accordingly.

HOW TO WRITE EFFECTIVE REVISION COMMENTS

Each revision comment should include: • The measurement point or element name • The current value from the sample • The target value from the spec • The correction direction and amount required • A photo reference if the deviation is visual rather than measured

"Chest width is 54cm, spec is 52cm, reduce by 2cm total (1cm each side)" is a usable comment. "Chest is too wide" is not.

GARMENTIX REVISION MANAGEMENT

Garmentix provides written revision summaries after each sample round and confirms corrections before starting the next sample. This structured approach typically resolves most styles within two to three rounds. Contact garmentix.net/contact to discuss your development program.

SUMMARY

Two to three revision rounds is normal for most garment types. More than four rounds for a simple garment indicates a documentation or communication problem that should be diagnosed and fixed rather than continued through more rounds. Clear, specific revision comments with measurements and photo references are the most effective way to reduce revision count.

FREQUENTLY ASKED QUESTIONS

Q: How many tech pack revision rounds is normal for OEM clothing production? A: One to three revision rounds is typical before sampling is approved. Most brands require one or two proto rounds for construction approval and one fit sample round for dimensional adjustment. Complex garments or new factory relationships may require an additional round. Budget the timeline for two rounds and treat one round as a best-case scenario.

Q: What causes the most tech pack revision rounds? A: Vague or incomplete original specifications cause most revision rounds. When factories fill gaps in your documentation with their own judgment, the result rarely matches your intent. Complete, specific documentation reduces revision rounds more than any other factor. See the most common errors at garmentix.net/blog/7-tech-pack-mistakes-fashion-startups-make-and-how-to-fix-them.

Q: How long does each tech pack revision round take? A: Each revision round takes 14 to 21 days from comment submission to revised sample receipt for Vietnam-sourced production. This includes factory revision time (7 to 14 days) plus international shipping (4 to 7 days via courier). Providing consolidated, specific, measurement-referenced comments in one document — rather than scattered messages — reduces factory revision time.

Q: How do I write effective comments for a tech pack revision round? A: Include: the specific measurement or construction detail at issue, the spec value, the observed value, and the correction required. Photograph the issue with a tape measure visible. Rank comments by priority (critical = must fix before proceeding; minor = acceptable if fixed on PP sample). Send all comments in one document per round — not as a series of messages over multiple days.

RELATED READING

7 Tech Pack Mistakes Fashion Startups Make: garmentix.net/blog/7-tech-pack-mistakes-fashion-startups-make-and-how-to-fix-them OEM Clothing Sampling Process — Proto to Production: garmentix.net/blog/oem-clothing-sampling-process-proto-to-production OEM Clothing Production Timeline — Week by Week: garmentix.net/blog/oem-clothing-production-timeline-week-by-week What to Include in a Tech Pack — Complete Checklist: garmentix.net/blog/what-to-include-in-a-tech-pack-complete-checklist-for-fashion-brands

#tech pack revision#garment sampling#clothing manufacturer#sample approval

Steven Tran

Founder & CEO, TT Garment Trade

10+ years leading OEM/ODM garment production in Vietnam. Former sourcing director connecting global fashion brands with verified factories across Southeast Asia.