Manufacturing Guide

What Is AQL in Garment Manufacturing? AQL 2.5 Explained for Fashion Brands

June 21, 2026Minh Pham
A garment worker examines a navy hoodie on a table in a clothing factory, with paperwork and folded garments nearby.

AQL (Acceptable Quality Limit) is the statistical sampling standard used in garment quality inspection. AQL 2.5 — the most common standard for mid-to-premium apparel — means the inspection process will accept a lot if defective units are statistically likely to be below 2.5%. For a 1,200-unit bulk order under AQL 2.5 (inspection level II), an inspector checks 200 pieces; the lot passes if 14 or fewer defects are found. Garmentix applies AQL 2.5 on all bulk orders before FOB release.

# What Is AQL in Garment Manufacturing? AQL 2.5 Explained for Fashion Brands

AQL stands for Acceptable Quality Limit — the maximum percentage of defective units a buyer is willing to accept in a shipment while still considering the lot "acceptable." It's based on ISO 2859-1, the international statistical sampling standard used in manufacturing quality control globally.

## Direct Answer: What Does AQL 2.5 Mean?

AQL 2.5 means: the inspection procedure is calibrated to reject lots where more than 2.5% of units are defective.

✦ FACT: Under AQL 2.5, Inspection Level II, a lot of 1,200 pieces requires a sample of 200 pieces to be inspected. The acceptance number is 14 — if 14 or fewer defects are found in 200 pieces, the lot is accepted.

## AQL Levels Used in Garment Manufacturing

| AQL Level | Defect Tolerance | Who Uses It | |---|---|---| | AQL 1.0 | Strictest | Luxury, safety-critical items | | AQL 1.5 | Very strict | Premium brands, complex construction | | **AQL 2.5** | **Standard mid-premium** | **Most fashion brands, including Garmentix** | | AQL 4.0 | Permissive | Basic commodity items |

## The Three Defect Categories in Garment Inspection

**1. Critical Defects (AQL = 0)** Zero tolerance — even 1 critical defect = lot rejection. - Choking hazard on children's items - Fabric fails flammability requirements - Label missing required country of origin

**2. Major Defects (AQL 2.5)** Defects visible to the end consumer likely to cause returns. - Broken stitches on structural seams - Wrong color or fabric vs. approved sample - Measurement deviations beyond tolerance - Staining, holes, snags

**3. Minor Defects (AQL 4.0)** Defects unlikely to be noticed by consumer or affect function.

## How the AQL Inspection Process Works

### Sample Size Determination (AQL 2.5, Level II)

| Lot Size | Sample Size | Accept (≤) | Reject (≥) | |---|---|---|---| | 281–500 units | 50 pieces | 3 | 4 | | 501–1,200 units | 80 pieces | 5 | 6 | | 1,201–3,200 units | 125 pieces | 7 | 8 | | 3,201–10,000 units | 200 pieces | 14 | 15 |

### Inspection Steps 1. Random sampling from across the lot 2. Each piece inspected against approved PP sample and tech pack 3. Defect count compared to acceptance number 4. Pass or fail decision 5. Inspection report with photos

## AQL Inspection Timing

**Inline inspection at 30% production:** Catches systemic defects early.

✦ FACT: Catching a measurement deviation at inline inspection (30% production) costs 5–10% to correct. The same deviation caught at final inspection costs 30–60% in rework.

**Final Random Inspection (FRI):** 100% of production complete, before FOB release.

## AQL Inspection at Garmentix

- Inline inspection at 30% production completion - Final random inspection (FRI) before FOB release - Inspection report provided to client with defect photos and measurement data - Third-party inspection available: QIMA, Bureau Veritas, SGS at client's request - Garmentix's average defect rate at final inspection: 1.2% (well below AQL 2.5 threshold)

## FAQ: AQL Garment Inspection

**Q: What does AQL 2.5 mean in garment manufacturing?** A: AQL 2.5 means the inspection sampling plan is calibrated to reject lots where the defect rate exceeds 2.5%. For a 500-unit lot: 80 pieces inspected, accepted if 5 or fewer defects found.

**Q: Who performs the AQL inspection?** A: Factories typically perform internal inspection. Brands often also commission third-party inspection by QIMA, Bureau Veritas, or SGS. Garmentix performs internal AQL 2.5 on all lots; third-party inspection available on request.

**Q: What happens if a lot fails AQL inspection?** A: Options: (1) 100% inspection and sorting (2) Rework — defective pieces repaired (3) Full rejection — lot re-produced. Which option depends on defect type, quantity, and client decision.

*Related: [Vietnam garment manufacturer guide](/en/blog/vietnam-garment-manufacturer-guide) | [How to find a clothing manufacturer in Vietnam](/en/blog/how-to-find-clothing-manufacturer-vietnam)*

Minh Pham

Technical Pattern Master, TT Garment Trade

12 years in garment pattern-making and product development. Expert in tech pack creation, grading, and production-ready specifications for OEM/ODM manufacturing.