Education

7 Tech Pack Mistakes Fashion Startups Make (And How to Fix Them)

14 tháng 6, 2026Minh Pham
A person arranges a navy work jacket with handwritten notes beside fabric swatches and garment design sheets.

Most sampling problems trace back to tech pack errors. These are the seven most common mistakes and the exact fixes to prevent costly production delays.

Tech pack mistakes are the leading cause of sampling failures, production delays, and extra costs for fashion startups. Most factories are working with hundreds of tech packs from dozens of clients — they will produce exactly what your documentation says, not what you intended. Here are the seven most common tech pack mistakes and how to fix each one.

MISTAKE 1: MISSING FABRIC WEIGHT

Writing "100% cotton jersey" without specifying grams per square meter is one of the most common tech pack mistakes. The factory will choose whatever weight they have in stock, which may not match your intended product at all.

Fix: Always specify fabric weight in GSM. Standard jersey t-shirts run 160-180gsm for lightweight and 200-220gsm for mid-weight. Heavyweight streetwear uses 260-300gsm. Include this in every fabric specification.

MISTAKE 2: INCONSISTENT COLORWAY REFERENCES

Writing "navy blue" or "forest green" without a Pantone number gives the factory no way to match your color exactly. Color names are interpreted differently across regions and manufacturers.

Fix: Include a Pantone TCX (textile) reference for every color in every colorway. If you want off-Pantone colors, include a physical swatch in your sample request.

MISTAKE 3: NO TOLERANCE COLUMN

Providing measurements without tolerance ranges forces the factory to guess how strict you are. A missing tolerance column leads to either rejected samples over minor variations or accepted samples with significant measurement drift.

Fix: Add a tolerance column to every measurement table. Standard tolerance for most garments is plus or minus 1 centimeter. Critical measurements like chest width may warrant tighter tolerance at plus or minus 0.5 centimeter.

MISTAKE 4: PLACEMENT DRAWINGS NOT INCLUDED

Text descriptions of label placement, print placement, or pocket position are open to interpretation. "Center chest print" does not specify the distance from the collar or the horizontal alignment precisely enough.

Fix: Include scaled technical flat drawings with measurement callouts for all placement details. Use consistent anchor points — distance from collar seam, from center front, from hemline.

MISTAKE 5: BOM NOT ITEMIZED

A Bill of Materials that says "buttons, zippers, labels" without specifying size, type, quantity, finish, and supplier is not useful. The factory will source whatever they have available.

Fix: Itemize every trim component with size, color, quantity per garment, preferred supplier (if applicable), and acceptable alternatives. For hardware, include finish (gold, silver, antique brass) and attachment method.

MISTAKE 6: CONSTRUCTION METHOD NOT SPECIFIED

Assuming the factory knows which stitch type to use is a common mistake. The difference between a clean-finished seam and a raw-edge seam is not always clear without explicit instructions.

Fix: Specify stitch type, stitch per inch count, seam allowance, and seam finish for every major seam. Indicate hem depth, fold direction, and whether coverstitch or single needle is required.

MISTAKE 7: SENDING INCOMPLETE TECH PACKS TO SAVE TIME

Some brands send a half-finished tech pack to get a quote faster, planning to complete it before sampling. Factories often start sampling from incomplete documentation or quote incorrectly because of missing specs.

Fix: Never send an incomplete tech pack. Use a checklist to verify all sections are complete before sending. Garmentix reviews all tech packs before sampling begins and flags incomplete sections — contact garmentix.net/contact.

SUMMARY

The seven most common tech pack mistakes are: missing fabric weight, missing Pantone references, no tolerance columns, absent placement drawings, incomplete BOM, unspecified construction method, and sending incomplete documentation. Each mistake adds time and cost to your sampling process. Fix them before your first send and you will see fewer revision rounds.

FREQUENTLY ASKED QUESTIONS

Q: What is the most common tech pack mistake that delays fashion startup production? A: Missing or non-specific measurement tolerances is the most frequent issue factories report. A measurement chart without tolerances gives the factory no basis for QC — they cannot determine whether a measurement deviation is acceptable or requires rework. Always specify both target measurement and acceptable range (e.g., "+/- 0.5cm" or "+/- 1cm" depending on garment section).

Q: What happens when a factory receives an incomplete tech pack? A: The factory sends back an RFI (Request for Information) listing all missing specifications before sampling begins. Each RFI round adds 3 to 7 days to your pre-production timeline. Factories that do not send RFIs and simply proceed with assumptions produce samples that do not match your intent — requiring additional revision rounds. A complete tech pack eliminates both scenarios.

Q: How do I know if my tech pack is complete enough to send to a factory? A: Use a checklist to verify every section before sending. The minimum viable check covers: complete flat sketch with all views, graded measurement chart with tolerances, fabric and trim specifications, construction notes, and label/packaging requirements. See the complete verification checklist at garmentix.net/blog/what-to-include-in-a-tech-pack-complete-checklist-for-fashion-brands.

Q: What should I do if my first proto sample does not match my tech pack? A: First, verify whether the deviation is a factory error or a tech pack gap. Compare the sample against your tech pack specifications section by section. If the spec was clear and the sample deviates, issue a correction note with specific measurements. If the spec was ambiguous, update the tech pack before the revision round. See the revision process at garmentix.net/blog/the-tech-pack-revision-process-how-many-rounds-is-normal.

RELATED READING

What to Include in a Tech Pack — Complete Checklist: garmentix.net/blog/what-to-include-in-a-tech-pack-complete-checklist-for-fashion-brands The Tech Pack Revision Process — How Many Rounds Is Normal: garmentix.net/blog/the-tech-pack-revision-process-how-many-rounds-is-normal How to Create a Tech Pack for Your Fashion Brand: garmentix.net/blog/how-to-create-a-tech-pack-for-your-fashion-brand-step-by-step OEM Apparel for Startups — What to Know Before Your First Order: garmentix.net/blog/oem-apparel-startup-guide-first-order

#tech pack#fashion startup#garment sampling#production mistakes

Minh Pham

Technical Pattern Master, TT Garment Trade

12 years in garment pattern-making and product development. Expert in tech pack creation, grading, and production-ready specifications for OEM/ODM manufacturing.