Education

Tech Pack for T-Shirt: Minimum Specifications Your Factory Needs

14 tháng 6, 2026Minh Pham
A printed apparel specification sheet shows front and back T-shirt drawings, measurement tables, fabric swatches, and drafting tools.

A t-shirt tech pack covers fabric weight, garment measurements, label placement, and print specs. Here is exactly what to include for clean sampling.

A tech pack for t-shirt production is the simplest type of clothing spec — but simple does not mean minimal. Even a basic crew neck tee has enough variables to go wrong if your documentation is incomplete. Fabric weight, fabric construction, label placement, seam type, and hem method all affect how your t-shirt looks, feels, and holds up after washing.

FABRIC SPECIFICATION

The fabric section is the most important part of a t-shirt tech pack. Specify:

• Fiber content — 100% cotton, cotton/polyester blend, bamboo/cotton, etc. • Fabric weight in grams per square meter — 160gsm for lightweight, 200-220gsm for standard, 260-300gsm for heavyweight • Fabric construction — single jersey, pique, slub, interlock • Finish — garment-dyed, piece-dyed, enzyme-washed, etc. • Pantone color reference for each colorway

Never write "cotton jersey" and leave it at that. A 160gsm single jersey t-shirt and a 260gsm ringspun jersey t-shirt are completely different products with different price points and production methods.

MEASUREMENTS

For a standard crew neck tech pack for t-shirt, include these points of measure:

• Chest width (measured 1cm below armhole) • Body length (from highest point of shoulder to hem) • Shoulder width • Sleeve length • Sleeve opening • Neck opening width • Neck opening depth (front and back) • Hem width

Provide measurements for every size you are producing with a tolerance column. Tolerance of plus or minus 1cm is standard for most measurements on a t-shirt.

CONSTRUCTION DETAILS

• Side seams: 4-thread overlock, 1cm seam allowance • Shoulder seams: taped or untaped — specify tape type if taped • Sleeve attachment: set-in or drop shoulder — spec clearly • Hem: coverstitch twin needle, 2cm hem fold, stitch 6mm from edge • Neck finish: rib collar or self-fabric binding — spec width and stitch

LABEL PLACEMENT

Specify position for each label. Brand neck label: centered, 1cm from neck seam. Care/size label: attached to left inside side seam or below neck label. If printing directly on the fabric (heat transfer or screen print label), specify dimensions and placement point.

GARMENTIX T-SHIRT PROGRAMS

Garmentix produces organic cotton, recycled cotton, and standard jersey t-shirts with OEKO-TEX Standard 100 certified fabric options. Contact garmentix.net/contact for production details.

SUMMARY

A complete tech pack for t-shirt manufacturing covers fabric spec with weight and construction, measurements for all sizes with tolerances, seam and hem construction details, and label placement drawings. These elements together give your factory everything needed to sample accurately without follow-up questions.

FREQUENTLY ASKED QUESTIONS

Q: What are the minimum specifications a t-shirt tech pack must include? A: The minimum viable t-shirt tech pack includes: flat sketch (front and back), fabric specification (composition, weight in GSM, yarn type), graded measurement chart with tolerances, construction notes (seam type, hem width, neck tape requirement), colorway information, and label placement diagram. Any missing element forces the factory to send an RFI that delays sampling.

Q: What fabric weight should I specify in a t-shirt tech pack? A: For premium fashion brand tees ($40+ retail), specify 200 to 250 GSM ring-spun or combed cotton jersey. For mid-range casualwear, 160 to 200 GSM combed cotton is standard. Always specify both GSM and yarn type — a 200 GSM open-end spun t-shirt will pill faster and feel less smooth than a 180 GSM ring-spun equivalent. See quality tiers at garmentix.net/blog/oem-t-shirt-manufacturer-quality-tiers-brands.

Q: Should I specify side-seam or tubular construction in my t-shirt tech pack? A: Specify side-seam construction for any fashion brand tee above entry level. Side-seam construction allows body shaping and produces a better fit. Tubular construction (no side seams) is cheaper but results in a boxy silhouette. Always make this decision explicit in your tech pack — factories will default to tubular if unspecified.

Q: How do I specify print or embroidery in a t-shirt tech pack? A: Create a separate artwork specification page showing exact print placement measurements (from center front seam, from shoulder seam, etc.), print dimensions, pantone color references, and print method (screen print, DTG, embroidery). Print specs are the most commonly incomplete section of t-shirt tech packs.

RELATED READING

Tech Pack for Hoodie — Every Specification Your Manufacturer Needs: garmentix.net/blog/tech-pack-for-hoodie-every-specification-your-manufacturer-needs What to Include in a Tech Pack — Complete Checklist: garmentix.net/blog/what-to-include-in-a-tech-pack-complete-checklist-for-fashion-brands OEM T-Shirt Manufacturer — Quality Tiers for Brands: garmentix.net/blog/oem-t-shirt-manufacturer-quality-tiers-brands OEM Knitwear Manufacturer — How to Source and Work With One: garmentix.net/blog/oem-knitwear-manufacturer-how-to-source-work-with

#tech pack#t-shirt manufacturer#garment specs#OEM production

Minh Pham

Technical Pattern Master, TT Garment Trade

12 years in garment pattern-making and product development. Expert in tech pack creation, grading, and production-ready specifications for OEM/ODM manufacturing.