Education

Tech Pack for Clothing Manufacturers: What Factories Actually Need

June 14, 2026Minh Pham
A man reviews garment production documents beside fabric swatches and clothing racks in a bright factory office.

Not all tech packs are created equal. Here is exactly what clothing manufacturers expect to receive before they can quote, sample, or produce your garment.

When a clothing manufacturer receives a tech pack, the first thing they check is completeness. Factories quote based on what they know, and gaps in a tech pack translate directly into inaccurate quotes, wrong samples, and delayed production. Understanding what a tech pack clothing manufacturer actually needs — not what a template says — separates brands that sample efficiently from those that spend months in revision loops.

WHAT FACTORIES LOOK AT FIRST

The first page factories review is the bill of materials. This tells them what fabrics, trims, threads, and labels are required. If the BOM is incomplete or vague, the factory will substitute with what they have available. Your design may call for 280gsm ringspun cotton jersey; if your tech pack just says "cotton jersey," you will receive whatever weight and construction the factory defaults to.

The second review is the measurement chart. Factories need a complete size-by-size measurement chart with tolerance allowances for every critical point of measure. A single-size spec without grading is not sufficient for production planning.

WHAT A COMPLETE TECH PACK MUST INCLUDE

For a tech pack clothing manufacturers can work from without follow-up questions, include these sections:

• Detailed bill of materials with supplier references where available • Front and back flat sketches with construction details called out • Size-by-size measurement chart with tolerance per measurement • Seam and stitch specifications for every construction point • Colorway specifications with Pantone references or approved lab dip codes • Label placement drawings with dimensions and position relative to seams • Packaging and folding specifications • Any test or certification requirements for the final product

COMMON GAPS THAT CAUSE PROBLEMS

The most common gap in tech packs sent to clothing manufacturers is missing construction detail on secondary elements. Brands document the main garment carefully but omit specs for pockets, cuffs, drawcord channels, and label placements. These omissions result in factories defaulting to their standard methods, which may not align with the brand's quality or aesthetic expectations.

A second common gap is missing information on care label content. Different markets require different care symbols and fiber content declarations. EU and US requirements differ, and factories cannot print your care labels without knowing your target market requirements.

WORKING WITH GARMENTIX ON TECH PACKS

Garmentix reviews every tech pack before sampling begins. Our technical team identifies gaps and flags them before fabric is cut. For brands building their first tech pack, we provide a tech pack review service and can assist with documentation from a detailed design brief. Reach out at garmentix.net/contact.

SUMMARY

A tech pack clothing manufacturers can use effectively includes a complete bill of materials, measurement chart with tolerances, construction details for all elements, colorway specs with Pantone references, label placement drawings, and care label requirements. Gaps in any of these areas result in samples that miss the brief. Invest in complete documentation before sending to factory to reduce sampling rounds and reach production faster.

FREQUENTLY ASKED QUESTIONS

Q: What do clothing manufacturers actually need in a tech pack? A: Clothing manufacturers need: a complete flat sketch with all views and details; a graded measurement chart with tolerances specified; fabric and trim specifications with exact material codes or descriptions; construction notes covering seam type, stitch type, and finishing; label and packaging requirements. Missing any of these sections forces the factory to send RFIs (Requests for Information) that delay sampling.

Q: What is the most common tech pack mistake clothing manufacturers see? A: The most common issue factories report is missing or vague measurement specifications — particularly tolerances. Factories need both the target measurement and the acceptable range. A measurement listed without tolerance gives the factory no basis for quality control. See the full list of tech pack mistakes at garmentix.net/blog/7-tech-pack-mistakes-fashion-startups-make-and-how-to-fix-them.

Q: Should I send a tech pack before or after getting a factory quote? A: Send the tech pack before requesting a quote. Factories cannot quote accurately without a tech pack — they are guessing at fabric cost, construction time, and trim costs without specifications. A quote produced without a tech pack is meaningless for production planning and almost always changes after factory review.

Q: How detailed should a tech pack be for a first OEM order? A: Fully detailed. A common startup mistake is submitting a partial tech pack expecting the factory to fill in gaps. Factories produce what you specify, not what you intended. See the minimum detail requirements by garment category at garmentix.net/blog/how-detailed-does-a-tech-pack-need-to-be-factory-minimums-explained.

RELATED READING

What Is a Tech Pack for Clothing — Complete Guide: garmentix.net/blog/what-is-a-tech-pack-for-clothing-a-complete-guide-for-fashion-brands What to Include in a Tech Pack — Complete Checklist: garmentix.net/blog/what-to-include-in-a-tech-pack-complete-checklist-for-fashion-brands How to Create a Tech Pack for Your Fashion Brand: garmentix.net/blog/how-to-create-a-tech-pack-for-your-fashion-brand-step-by-step OEM Clothing Manufacturer How to Choose the Right Factory: garmentix.net/blog/oem-clothing-manufacturer-how-to-choose-right-factory

#tech pack#clothing manufacturer#OEM production#garment specs

Minh Pham

Technical Pattern Master, TT Garment Trade

12 years in garment pattern-making and product development. Expert in tech pack creation, grading, and production-ready specifications for OEM/ODM manufacturing.